Ford F150 Factory Subwoofer Replacement

Are you looking for a way to upgrade the sound system in your Ford F150? I will share with you one of the simplest and most cost-effective ways to swap your subwoofer in the Ford F150 Supercrew!

By replacing your factory subwoofer with an aftermarket model, you can get a much better bass response and overall sound quality, making all your music great.

I’ll walk you through each step of the process, from choosing a new subwoofer to wiring it up correctly so that you get the maximum performance out of your new setup.

I’ll also provide tips on finding the right replacement parts and tools needed for installation (For a better bass upgrade). With my help, upgrading your truck’s audio system can be done quickly and easily!

Is It Possible to Swap an F150 Factory Subwoofer With a Better One?

Yes, you can quickly swap the factory sub with an aftermarket subwoofer in your Ford F150. However, It will require some wiring and installation knowledge to do so.

The key is finding the best subwoofer for f150 supercrew that will fit in the same space and have enough power to fill the cabin with sound adequately.

Additionally, installing an aftermarket amplifier may also be necessary (If you’re going to install a passive subwoofer) depending on power needs and desired sound levels.

Understanding the Factory Subwoofer in Ford F150:

As we know, factory subwoofers are weaker than aftermarket ones. The factory sub typically has a small diameter, which limits its ability to produce low-frequency sounds, resulting in decreased performance.

Additionally, it may not have enough power to create the desired bass level. Moreover, these factory subs may also start producing sound distortion, rattling throughout time.

So therefore, replacing it with an aftermarket model explicitly designed for the F150 should significantly improve sound quality while providing ample power for deep background tunes or intense beats when needed.

Selecting a Replacement Subwoofer:

Now the challenge for the F150 owners is finding better replacements for their current factory subwoofers. I’ve got your back here!

You must consider some factors when selecting a replacement subwoofer for your Ford F150. The most important one is the size of the unit and whether it can fit in your vehicle’s interior (It can be under the seat or behind the rear seat).

Additionally, you should pay attention to power handling, impedance, and sensitivity, as these impact sound quality. Furthermore, you must also consider that the replacement subwoofer should be suitable for the system’s audio setup.

Popular aftermarket options include JL Audio W6v3, Rockford Fosgate P3, and Kicker L7 subwoofers, providing excellent sound quality with rigid construction materials that ensure long-lasting use (However, you can use the above link to check more options).

Depending on your preferences, you can choose speaker types according to their power output and bass response kind in addition to other unique features such as adjustable gain control or low pass crossover filters allowing additional control over bass production.

However, you can select an under-seat subwoofer if you are a family or space-conscious dude. On the other hand, if you’re a hardcore audiophile, you can use a dual subwoofer setup in your truck.

There are some enclosure options in the market that will fit well under your truck’s seats and can accommodate two subwoofers rather than one.

Moreover, there are two types of subwoofers, i.e., powered and passive. The passive subwoofer will require an extra amplifier in your Ford F150 to work, while the active sub comes with a built-in amp.

How to Remove a Factory Subwoofer From Ford F150?

Removing the factory subwoofer from your Ford F150 is not tricky, but it requires knowledge of the vehicle’s setup. I’ve seen many newbies asking for help from me after they detach their truck stereo step.

So, read the following steps carefully to avoid any mistakes:

1. Firstly, locate the trim panel that covers your speaker mounting position. Depending on your model and year, you may find it around the interior or trunk area (or even under the back seat).
2. After locating it, you must remove any screws or bolts holding it in place so that it can be taken off to access to factory subwoofer. (Drive the screwdriver in the right direction)
3. Once you can reach inside where the factory subwoofer is mounted, disconnect the wiring harness plugging into its back, and loosen any screws that hold it securely into place before removing entirely from its enclosure.

That’s all! However, it’s also essential to take care when handling sensitive electrical components found within car audio systems for safety reasons.

If in doubt about anything relating to the installation or removal of any car audio component, seek advice from an experienced professional (like me) at all times!

Swapping the Replacement Subwoofer:

Because you have already removed the old factory subwoofer from the location, installing a replacement subwoofer in your Ford F150 will be straightforward. Follow the below steps for success:

1. First, check your aftermarket subwoofer can be connected to a wiring harness. If not, you can use a subwoofer wiring kit.
2. For a powered subwoofer, you can connect it directly with the wiring harness (Using low-level inputs or high-level inputs). If using a passive subwoofer, connect it with a suitable external amplifier to power it and connect the external amp to the factory stereo wiring harness using the RCAs or recommended connection type.
3. Also, you must not forget to ground your subwoofer setup, as it will prevent any unpleasant noises. You can use ground wire for such a purpose.
4. You must handle both components carefully during this process, as any mishandling or damage could affect sound quality.
5. Once connected, screw the replacement subwoofer into place and replace the trim panel back onto your vehicle. Ensure that all screws have been tightened correctly so that nothing moves.

Test the Replaced Subwoofer and Tune it Accordingly:

Once the replacement subwoofer has been successfully installed and wired, it’s essential to test it thoroughly. Start playing various music through the subwoofer at moderate volume and listen for distortions or rattling sounds.

Double-check the wiring connections to ensure everything is secure if you hear anything unusual. When you’re happy with how things sound, it’s time to tune your subwoofer for optimal performance.

You can use crossover and gain settings on your amplifier accordingly; most modern amps and subwoofers will come with preset settings that should work well, but if you want better control over your sound quality, experimenting with different settings may result in improved performance.

You should now be able to enjoy a more excellent range of frequencies with much better bass response than before – great for taking long trips or showing off at a car meet-up!

General FAQs